A dripping faucet, a drain that is a little slower than it used to be, a water heater that takes longer to recover than it did last winter. None of those feel urgent on their own. Left alone, each one tends to become something bigger, and by the time it does, the job is more involved than it needed to be. Catching a small leak before it opens a wall, or clearing a partial blockage before it becomes a full backup, is where a plumbing call pays for itself most clearly.
Hillsboro is a city with a substantial share of older housing alongside newer construction and a significant commercial and multi-family sector. The work that comes out of a city this size runs the full range: aging pipe materials in pre-1960s homes, sewer lines that have had decades of root pressure, water heater replacements in apartment buildings, and fixture and drain work in commercial kitchens and office spaces. We handle all of it.
Call (971) 525-1995 to get a quote from us and get the visit on the schedule.
The rate for a plumbing job is settled on the call, before the visit is booked. Describe what is happening, where in the property it is happening, and roughly when it started, and we scope the job from there. The price covers what the work involves, not a rough guess that gets revised once someone is on site.
What changes a quote is usually what the job turns out to require once it is actually in front of someone. A drain clog that clears with a standard snake is a different job from one that needs hydro jetting to clear a buildup deep in the line. A water heater replacement is straightforward until the supply connections are in poor condition and need attention before the new unit goes in. Those situations get discussed before anything additional is done.
There is no diagnostic fee quoted on this page, and no hourly rate, because those figures live on the services page and restating them here is how a site ends up contradicting itself. What you get when you call is a straight answer on what the job involves and what it costs.
Call (971) 525-1995 and ask.
Most properties in Hillsboro connect to a municipal water supply. That water is naturally soft in this part of the Pacific Northwest, which means a softener or descaling system is not solving a local problem. If you have been told you need one, it is worth asking what the actual water quality reading is before committing to the installation.
Properties on a private well are a different situation. A well system has its own pressure tank, its own pump, and its own filtration demands, and those components need attention that a municipal connection does not. Pressure that fluctuates between fixtures, water that has changed in taste or clarity, or a pump that cycles more than it should are all signs that the well system needs a look. We handle the plumbing side of that work, from the pressure tank and supply lines through to the fixtures inside.
Where filtration makes sense, whether for a well property or a specific water quality concern, we handle the installation and the plumbing connections that go with it. A whole-house filter, an under-sink unit, or a point-of-use setup each connects to the supply line, and the installation involves more than setting the unit on a shelf. The connections have to be made correctly, the pressure has to be right, and the bypass valve has to work when it needs to. We scope that on the call and confirm the price before the work starts.
For busy homeowners and property managers, the scheduling question is often as important as the repair itself. A tenant cannot be without water for a full day. A commercial kitchen cannot shut down service. A property manager handling multiple units needs the visit confirmed and the work finished cleanly, not stretched across multiple trips.
We take short-notice and emergency calls every day from 5:30 AM to 8:00 PM, weekends included. For a burst pipe, a sewer backup, or a complete loss of hot water, the call gets answered and the job gets scoped on the phone before anything is dispatched. For planned work, the visit is confirmed when you book, and the scope and price are settled before anyone arrives, so there are no open questions on the day.
For occupied rentals and commercial properties, we work through the access details on the call. If the tenant will be home, if a property manager is handling access, if the space needs to stay open during the visit, those are things we plan around before the appointment is made.
Plumbing for a new bathroom or a kitchen renovation has to happen in sequence with the other trades, and getting the rough-in done at the right stage is what keeps a project from stalling. Once walls are framed and before they are closed, the supply and drain lines go in. Coming in too late means opening finished surfaces. Coming in at the right time means the work is buried before drywall goes up and the project moves forward on schedule.
We handle the full plumbing scope on renovation work: new supply lines, drain rough-ins, vent connections, and fixture installation once the space is ready for it. For a bathroom addition, that includes the toilet, the sink, the shower or tub, and the connections that tie the new lines back into the existing system.
A renovation with multiple trades on site means coordination matters. We confirm the scope and the timing on the call, and we plan the visit around what the project actually needs rather than treating it as a standard service call. If the framing is not ready, the rough-in does not happen until it is. If the tile is going in before the fixture is set, we schedule accordingly.
A water heater that stops producing hot water entirely is usually a failed element in an electric unit, a tripped thermostat, or a unit that has reached the end of its service life. Inconsistent temperature, where the water is hot for a few minutes and then drops, often points to a partially failed element or a sediment buildup that has reduced the effective capacity of the tank. We diagnose the fault before recommending repair or replacement, and if the unit needs replacing, we walk through the options on the call. Most homes in this region run electric water heaters, and a tankless upgrade is worth discussing if the household demand has outgrown the current tank.
A drain that is slow but still moving is usually a partial blockage that has been building for a while. Left alone, it becomes a full backup, and a full backup in a kitchen or a main line is a more involved job than clearing a partial clog. We handle drain cleaning from the fixture level through to the main line, and for buildup that a standard snake cannot reach, hydro jetting clears the line from the inside out. The approach depends on where the blockage is and what it is made of, and we confirm that before the work starts.
Galvanized, copper and PEX pipes each fail in their own way. Galvanized steel, common in homes built before roughly 1951, corrodes from the inside. The signs are low pressure that has gotten gradually worse, discolored water at the faucet, and small leaks that keep appearing in different parts of the house. Polybutylene, used in some homes built between the late 1970s and mid-1990s, fails at the fittings rather than the pipe body, and the failures tend to come in clusters. When either material is the underlying problem, repiping the affected lines is the repair that actually holds. Crawlspace access, standard in much of the older housing stock in this region, makes that work reachable without major demolition.
A backflow preventer stops contaminated water from flowing back into the supply line when pressure drops. Most commercial properties, irrigation systems connected to a potable supply, and some residential installations are required to have one, and those devices need periodic testing and servicing to confirm they are still doing their job. We handle backflow preventer inspection, repair, and replacement. If you are not sure whether your property has one or whether it has been serviced recently, that is a conversation worth having on the call.
We cover Hillsboro and the communities around it throughout Washington County, including Rockcreek, Oak Hills, Bethany, Cornelius, and Aloha.
If your address falls between any of those areas, call (971) 525-1995 and we will confirm coverage on the call. Most properties in and around Hillsboro are within our service area.
The work is handled locally. Whether the job is a routine fixture repair, an emergency call, or a sewer line replacement, the process is the same: scope on the call, price confirmed before scheduling, visit arranged from there.
A significant share of homes in Hillsboro were built before the 1960s, when galvanized steel was the standard for supply lines. Those pipes corrode from the inside over time, causing low pressure, discolored water, and recurring leaks that keep appearing in different parts of the house. Homes built between the late 1970s and mid-1990s may also have polybutylene pipe, which is prone to fitting failures.
If your home falls in either of those windows and you are seeing pressure or leak issues, call (971) 525-1995 and we will talk through whether an inspection or a repipe makes sense.
Insurers vary in what they ask for, so it is worth checking with your provider before the visit. We document the work completed and can describe what was found and what was done, which is typically what an insurer needs to process a claim related to a leak or a pipe failure.
A water stain or moisture at the base of a toilet usually points to a failed wax ring seal between the toilet and the drain flange, or a crack in the base of the porcelain. Either way, it is worth addressing promptly since water at the base can damage the floor over time.
Call (971) 525-1995 and we will scope the repair.
Backflow prevention devices on commercial properties and irrigation systems connected to a potable supply are typically subject to periodic testing requirements, though the specifics depend on the type of connection and the issuing authority. We handle backflow preventer testing, repair, and replacement, and we can talk through what your property's installation involves when you call. If you are unsure whether your device has been serviced or whether testing is due, that is worth confirming before it becomes a compliance issue.
The plumbing work itself follows the same process: describe the situation, get a price, schedule the visit. Larger properties or those with outbuildings and extended pipe runs may involve a longer scope conversation on the call.
Call (971) 525-1995 and describe the property and the problem, and we will tell you what the job covers.
They can, but they are not required. A clear description of what you are seeing or hearing is usually enough to scope the job on the call. If the situation is unusual or hard to describe, having a photo available when you call can help clarify the details.
The plumbing work follows the same process, but food service properties often have grease buildup in drain lines that requires hydro jetting rather than standard snaking. Describe the type of business and the problem on the call, and we will scope the job for what the situation actually involves.
You are, before anything changes. If a repair reveals a larger underlying problem, we stop and explain what we found, what it means, and what the options are. Nothing additional is done without your agreement.
We are available every day from 5:30 AM to 8:00 PM for plumbing repair, installation, and emergency calls across Hillsboro and Washington County. Not the biggest name in town. Just the one that answers. No runaround.
Call (971) 525-1995 for a quote.
There is no form to fill out and no waiting for a callback. The call gets answered, the job gets scoped, and the visit gets scheduled.
Just as close, we take plumbing work in: Rockcreek, Oak Hills, Bethany, Cornelius, Cedar Hills, Forest Grove.
The rest are on our full list of areas.
Every plumbing job starts with understanding what is actually wrong before anything is opened up or replaced. We scope the work on the call, confirm the price before the visit is scheduled, and carry the job through to a tested result. The table below covers the full range of work we handle across Hillsboro and Washington County, so you can find what you need and call with a clear picture of what to expect.
| Service | Scope of Work | When to Call | Things to Keep in Mind |
|---|---|---|---|
| Pressure-Regulating Valve Installation | PRV sizing and selection, Main line installation, Pressure testing before and after, Shutoff valve coordination | Homes with high incoming street pressure, banging pipes, or fixtures that wear out faster than they should | Street pressure in parts of Washington County can run higher than most fixtures and appliances are rated for. A PRV protects the whole system |
| Water Heater Repair & ReplacementMost Popular | Tank and tankless units, Element and thermostat diagnosis, Full unit replacement, Gas line connection to the appliance | No hot water, inconsistent temperatures, or a unit nearing the end of its service life | We diagnose the fault first. A failing element or thermostat is a repair. A unit with sediment damage or age-related failure is a replacement conversation |
| Water Pressure & Shutoff Valve Repair | Pressure-regulating valve diagnosis and replacement, Whole-house and fixture shutoff valve repair, Outdoor faucet and hose bib service, Pressure testing | Low pressure throughout the house, a valve that will not close fully, or a hose bib that leaks | A shutoff valve that will not close is a liability on any property. We address it before it becomes an emergency |
Call (971) 525-1995 and describe what you are dealing with. We will scope the job, give you a price, and get it on the schedule.
(971) 525-1995