Some plumbing jobs get planned. A homeowner decides to replace the water heater before it fails, or a landlord schedules a drain cleaning between tenants. Then there are the calls that start before sunrise: a pipe that split overnight, a main line backup that has taken out every fixture in the house, a water heater that went cold sometime after midnight. We take both kinds of call, every day from 5:30 AM to 8:00 PM, and the process is the same either way. You describe what is happening, we scope the job on the phone, and you get a price before anything is scheduled.
Sherwood is a town where most of the housing stock sits over a crawlspace, and a meaningful share of those homes were built when galvanized steel was the standard pipe material. That shapes what the work looks like here. We handle the full range, from a dripping faucet to a whole-house repipe, and the call is where it starts.
Reach us at (971) 525-1995.
Not every plumber works the same way, and the jobs below come up often enough in a town this size that they are worth describing by what actually leads to them, not just by their name.
A pipe that bursts or splits rarely gives much warning. The first sign is usually water where water should not be, whether that is under a sink, inside a wall, or pooling in the crawlspace. The priority on that call is stopping the flow and scoping the damage. We locate the break, confirm what else may have been affected, and repair the section. The repair is pressure-tested before the visit ends.
Pressure that has dropped gradually across the whole house is a different problem from a single fixture that runs weak. The first points toward the supply side, often a regulator that is wearing out or, in older homes, pipe interior that has narrowed with corrosion. The second is usually a fixture-level issue. We diagnose the cause before recommending anything, because the fix depends entirely on where the problem actually sits.
A new shower or bath installation involves rough-in work, supply connections, drain fitting, and fixture setting. When an existing layout is being changed rather than replaced in kind, the scope expands to include rerouting supply or drain lines to the new position. We handle the plumbing side of the installation from the supply connection through to the finished fixture.
When a blockage is in the main sewer line rather than a branch drain, every fixture in the house is affected. Toilets back up, tubs fill with standing water, and running the washing machine can cause a drain to overflow somewhere else entirely. We clear main line blockages and inspect the line to understand whether the cause was a buildup, a root intrusion, or something structural. If the line needs more than clearing, we talk through the options before any additional work is planned.
A slab leak is a supply or drain line failure beneath a concrete floor. The signs are often subtle at first: warm spots underfoot, a water bill that has climbed without explanation, or a meter that keeps moving when everything in the house is off. We locate the leak using pressure testing and detection methods that do not require opening up the slab to find it first, then scope the repair from there.
A refrigerator water line is a small job that causes a disproportionate amount of damage when it fails. A slow drip behind the appliance can run for weeks before it is noticed. We install, repair, and replace supply lines to refrigerators and ice makers, including the shutoff valve that controls them. It is a straightforward job and worth doing correctly the first time.
For busy homeowners and property managers, scheduling a plumbing visit should not take more than one conversation. When you call, we scope the job, give you a price, and confirm a time. That is the whole process. There are no callbacks to wait for and no steps between the call and the appointment.
When a problem cannot wait, we take short-notice calls every day within our service hours. A burst pipe or a backed-up main line is not something to manage around a standard appointment window, and we do not ask you to.
Call (971) 525-1995, describe what is happening, and we will tell you what the schedule allows and what the visit will cost.
For rental properties and occupied commercial spaces, we work around what the property needs. A tenant who has to stay in the unit, a business that cannot shut down a kitchen for the day: those are conditions we account for when the job is scoped on the call. We treat your home the way we would want ours treated, and the same approach carries over to every property we work on.
Some plumbing work in Sherwood requires a permit before it starts, and some does not. The line generally falls between routine repairs and replacements on one side, and new installations, significant alterations to the existing layout, or work that changes the supply or drain configuration on the other.
Water heater replacements, sewer line work, and repiping projects are the jobs most likely to carry a permit requirement. What triggers one, and what the inspection process looks like, depends on the municipality and the specific scope of the work. We confirm what applies to your job before anything is scheduled, so the permitting step is factored into the timeline rather than discovered after the fact.
The practical effect on timing is usually modest. A permit that needs to be pulled before work starts adds a step, and an inspection that has to happen before a wall is closed adds another. Neither is a reason to skip the process, and we do not recommend doing so.
Plumbing quotes are not one-size figures, because the work rarely is. What a job costs depends on what the fault turns out to be, where it is located, and what has to be accessed or disassembled to reach it. A leak that is visible at the fixture costs less to repair than one that is behind a wall or under a floor, not because the repair itself is different, but because getting to it is.
When you call, we scope the job based on what you describe. That conversation produces a price before anything is scheduled. If the visit reveals that the problem is more involved than the initial description suggested, we talk through the revised scope before any additional work is done. No-pressure estimates, priced up front, so the decision is yours before anything starts.
The things most likely to move a quote are access, pipe material, and whether a single failure point is part of a broader pattern. A fitting that keeps failing on a galvanized steel line is a different situation from the same fitting on a copper line, and we give honest recommendations on repairs, never an upsell.
Some properties outside Sherwood's core rely on a private well rather than a municipal connection. A well system introduces components that a city-supplied property does not have: a pressure tank, a pump, a check valve, and the supply line that runs from the well to the house. When pressure is low or inconsistent on a private supply, the fault could be in any of those components, and diagnosing it requires working through the system rather than going straight to the fixtures.
Long supply runs also matter. A property where the line travels a significant distance from the source to the house has more exposure to temperature swings, ground movement, and joint failure than a short urban run. We account for that when scoping the job.
What makes a property straightforward to work on is access. Crawlspace clearance, shutoff valve location, and whether the main can be isolated without affecting a neighboring unit are the practical factors that shape how a visit goes. If you are not sure about any of those, describe the property on the call and we will work through it with you.
We cover Sherwood and the surrounding area, including King City, Tualatin, Bull Mountain, Durham, and Wilsonville. Washington County properties throughout this part of the region are within our service area.
If your address falls between any of these towns, call (971) 525-1995 and we will confirm coverage on the call.
The process is the same regardless of where the property sits. You call, we scope the job, you get a price, and the visit is arranged. Give us a call and we will take it from there. See the plumbing repair services page for how the work is handled.
Yes, though work beneath a shared surface involves additional considerations around access and disruption. We scope the job on the call, including what the access situation looks like and what the repair method involves. Trenchless methods can reduce surface disruption in those situations.
It can, depending on the scope of the work. Jobs that require a permit before they start, such as water heater replacements, sewer line work, or repiping projects, need that step factored into the schedule. We confirm what applies to your specific job on the call so the timing is clear before anything is booked.
In many cases, yes. A vented crawlspace gives direct access to supply and drain lines without opening floors or walls from above, which keeps the work more targeted and the disruption lower. We confirm what the access situation looks like on the call and scope the job accordingly.
Yes. We work on occupied rental properties and account for tenant access when the job is scoped. If you are a landlord or property manager who needs the work done around a tenant's schedule, describe the situation when you call and we will work through the access details before the visit is arranged.
Payment is taken when the job is complete. The price is confirmed before the visit is scheduled, so you know what the job covers before anyone starts.
Whatever the job, the call is where it starts. We answer the phone. We get the visit booked. We keep it simple.
Reach Aloha Plumbing Company at (971) 525-1995, every day from 5:30 AM to 8:00 PM.
We also take plumbing work in: Tualatin, Bull Mountain, Wilsonville, Tigard, Newberg.
Everywhere else we go is in our full list of areas.
Every plumbing job starts with understanding what is actually wrong before anything is opened up or replaced. We scope the work on the call, confirm the price before the visit is scheduled, and carry the job through to a tested result. The table below covers the full range of work we handle across Sherwood and Washington County, so you can find what you need and call with a clear picture of what to expect.
| Service | Scope of Work | When to Call | Things to Keep in Mind |
|---|---|---|---|
| Water Heater Repair & ReplacementMost Popular | Tank and tankless units, Element and thermostat diagnosis, Full unit replacement, Gas line connection to the appliance | No hot water, inconsistent temperatures, or a unit nearing the end of its service life | We diagnose the fault first. A failing element or thermostat is a repair. A unit with sediment damage or age-related failure is a replacement conversation |
| Toilet Repair & Installation | Running or leaking toilet repair, Fill valve and flapper replacement, Full toilet replacement, Wax ring and supply line work | A toilet that runs constantly, leaks at the base, or needs replacing as part of a bathroom update | A toilet that runs between flushes can waste a significant volume of water daily before most homeowners notice the sound on the bill |
| Trenchless Sewer Line Replacement | Camera inspection to confirm condition, Pipe lining or pipe bursting method, Access-point entry without full excavation, Final camera verification | Cracked, root-intruded, or collapsed sewer lines where the yard, driveway, or landscaping is worth preserving | We inspect the line first to confirm whether the method applies. Not every line is a candidate, and we say so before any work is planned |
Call (971) 525-1995 and describe what you are dealing with. We will scope the job, give you a price, and get it on the schedule.
(971) 525-1995